凹凸在线视频国产_女人18八毛片a级毛片_伊人大杳蕉在线影院75_99在线精品一区二区三区_免费又爽又黄禁片1000部视频_国产三级理论电影_亚洲经典日韩精品_中文字幕在线中文不卡_九九视频国产免_中文字幕在线视频日韩精

Before starting the operation of the CNC lathe, a series of initial data debugging needs to be done. The purpose of this is first to set the basic data required for machining operation. Secondly, it plays a role in running and debugging when using the CNC lathe for the first time. Among these data debugging, tool inspection is one of the important items. Today, our CNC lathe manufacturer will explain the basic methods of tool inspection for CNC lathes.
Test the outer circle with an external turning tool, remember the current X coordinate, and measure the diameter of the outer

circle. Use an external turning tool to test drive an external circle first, remember the current X coordinate, measure the diameter of the external circle, subtract the diameter from the X coordinate, and input the value into the geometric shape X value on the offset interface. Test drive the outer end face with an external turning tool, remember the current Z coordinate, and enter the number on the offset interface.
Step 1: Confirm that if the tool is not, it needs to be changed. In MDI mode, enter the tool change command: T0x0x2. In MDI mode, enter the speed command:

SxxxM0x. Step 2: Test cutting. Quickly approach the workpiece and be careful not to touch it. 2Z direction tool alignment: in manual feed mode. Grinding the inner hole lathe tool starts with a general cutting tool, and the skills of a lathe worker cannot be learned completely. The most ordinary lathe worker does not require high skills. It can be divided into 5 types of lathe workers, which are currently the most common in society. 1. Ordinary mechanical lathe workers, easy to learn, find a lathe processing department, which is better than what you learned in school. 2. Mold lathe workers, especially plastic mold precision lathe workers!
1. First, enter M3S500 in MDI state and press the cycle key to start. Then, press the JOG (manual) handwheel multiplier and press 25% to retract the workpiece end face along the X handwheel. After retraction, the Z direction cannot be moved. Press the 0FFSET key to enter tool compensation and find the tool number of the outer circular tool. Enter Z0 and then press the input key to complete the Z-direction workpiece coordinates. 2. Outer circular knife X: JOG hand. First, take a look at whether the following is useful to you. If it still doesn't work, write an email address and I will send you a PDF version of the paper about tool alignment: directly use the tool to test cutting tool alignment 1. Use an outer circle turning tool to test the outer circle first, remember the current X coordinate, measure the outer circle diameter, subtract the outer circle diameter from the X coordinate, and input the value into the geometric shape X value in the offset interface to use the outer circle.
The above is the basic method of tool checking for CNC lathes compiled and released by CNC lathe manufacturers. We hope that the above explanation can be helpful for everyone when using CNC lathes in the future.