凹凸在线视频国产_女人18八毛片a级毛片_伊人大杳蕉在线影院75_99在线精品一区二区三区_免费又爽又黄禁片1000部视频_国产三级理论电影_亚洲经典日韩精品_中文字幕在线中文不卡_九九视频国产免_中文字幕在线视频日韩精

In the CNC lathe industry, we all know a common path, which is that in order to process high-precision and high-quality products, it is not enough to have good machine equipment alone. Good operating skills and experience support are also needed, because various problems are often encountered during the operation of CNC lathes. We need to deal with these problems in a timely manner. Today, our CNC lathe manufacturer will explain the technical encyclopedia of CNC lathe operation process to you.
1: How to unlock the spindle of a CNC lathe: use the spindle positioning function. When the spindle is oriented and positioned, the machine tool spindle is locked in place. If the machine tool spindle motor is a servo spindle motor, it can have spindle orientation and spindle positioning functions. M19 is spindle orientation, M18 is spindle orientation release. Just use this auxiliary function code. Machine tool spindle: Machine tool spindle refers to the belt on the machine tool.
2: How to solve the write protection of CNC lathe display: write protection, whether it is parameter write protection or program write protection. If it is program write protection, it is estimated that there is a program lock, so it is not allowed to modify the program. If it is parameter write protection, the parameter switch is not turned on. Clearly state your system model and then come back to find the answer.
3: What is the reason why the CNC lathe cannot run idle after clicking the lock button? Answer: Did you first press the cycle start button when simulating machining. And then run it empty again? If not, just restart. There are many problems with low-end systems. Please ask the expert to explain the reason for this situation.
4: How to lock the CNC system: Enter the second level password, there is a system time, and there is a shutdown time inside. Just set the shutdown date.
5: How to unlock the CNC lathe program: Click on the debugging page.
6: Why do some CNC lathes need to be re aligned after emergency stop and machine tool locking? Answer: Generally, high-end CNC machine tools are closed-loop controlled, and the tool position is 100% controlled throughout the entire machining process. For non closed loop control systems, after the machine tool emergency stop or machine tool lock, the system will only remember the previously sent position, and the vibration movement of the tool and the movement caused by system errors will not be recorded. Therefore, if the tool is not re aligned.
The above is the technical encyclopedia answer to the operation process of CNC lathes summarized by CNC lathe manufacturers. We hope that the above explanation can be helpful for everyone when operating CNC lathes in the future.